Fisher & Paykel MyAIRVO 2 Tracheostomy Mask Interface Adapter

Sold as Each

Optiflow Mask Interface Adapter is a lightweight accessory that is designed for the myAirvo2 Humidifier.


  • Connects to tracheostomy mask       (Mask ordered seperately - Item HUD1075)
  • 22mm medical taper standard 
  • Lightweight
  • Flexible interface tube

Suggested Use:

  • Connect the Mask Interface Adapter to the 22mm connector on the mask and then to the heated breathing tube.
  • Check that all connections are secure.


  • Appropriate patient monitoring must be used at all times. Failure to monitor the patient may result in loss of therapy, serious injury or death.
  • The Mask Interface Adapter is for use with vented masks ONLY. Do not use with sealed masks.
  • Do not use near a naked flame, to avoid fires.
  • Do not crush or stretch tube, to prevent loss of therapy.
  • For single patient use only. Reuse may result in transmission of infectious substances. Attempting to reprocess will result in degradation of materials and render the product defective.
  • The lanyard poses a potential risk of strangulation to vulnerable patients (e.g. children).


  • Failure to use the set-up described above can compromise performance and affect patient safety.
  • Before connecting the interface, check for adequate gas flow and ensure that the system has warmed up.
  • Check for condensate regularly. Drain as required.
  • Do not use if packaging is not sealed.

Home Use:

  • This product is intended to be used for a maximum of 30 days providing daily and weekly cleaning instructions are followed (see the MyAIRVO 2 User Manual).
Barcode # OPT980
Brand Fisher & Paykel
Unit Of Measure Each

Related products

More From This Category